Specifying Settings In Setting Up Ldap Screen 3/4 - Konica Minolta bizhub c200 User Manual

Specifying network settings

Specifying settings in Setting Up LDAP screen 3/4

1
Touch [Login Name].
– If "anonymous" was selected as the authentication method, it is not necessary to specify the login
name and password.
2
Type in the login name, and then touch [OK].
– A maximum of 64 characters can be entered.
3
In Setting Up LDAP screen 3/4, touch [Password].
4
Touch [New Password], type in the password, and then touch [OK].
– A maximum of 32 characters can be entered.
5
Touch [Confirm New Password], type in the password again, and then touch [OK].
6
When the Change Password screen appears again, touch [OK].
– If the password was entered incorrectly, the message "Enter correct password." appears. Touch
[OK], and then type in the correct password.
7
In Setting Up LDAP screen 3/4, touch [↓].
Setting Up LDAP screen 4/4 appears.
C200
1
1-29