Specifying Software Switch Settings - Konica Minolta bizhub c200 User Manual

Specifying machine functions (software switch settings)
2.2

Specifying software switch settings

Follow the procedure described below to specify the software switch settings.
1
In the Administrator Management screen, touch [↓] to display the next page.
– For details on displaying the Administrator Management screen, refer to
Settings screen" on page
2
In the Administrator Management screen, touch [Software Switch Setting].
3
Touch [Mode Selection], and then use the keypad to type in the mode number.
4
Touch either [Bit Selection] or [HEX Selection], and then specify the setting.
– To specify the bits, touch [Bit Selection], touch [←] or [→] to move the cursor to the bit to be
changed, use the keypad to specify the bit, and then touch [Apply].
C200
1-2.
2
"Displaying the Network
2-4