Konica Minolta bizhub C300 Users Manual [Security Operations page 142

User Operations
10
Enter the currently set 8-digit User Box Password from the keyboard or
keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 9.
11
Touch [OK].
? What happens if the User Box Password entered does not meet the
requirements of Password Rules?
% If the User Box Password entered does not match the current pass-
word, a message appears that tells that the User Box Password en-
tered is wrong. Enter the correct User Box Password.
% If the Enhanced Security mode is set to [ON], entry of a wrong User
Box Password is counted as unauthorized access. If a wrong User
Box Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine, the screen
of step 2 reappears and the machine is set into an access lock
state. To cancel the access lock state, the Administrator of the ma-
chine must perform the Release Setting. Contact the Administrator
of the machine.
12
Enter the new 8-digit User Box Password from the keyboard and key-
pad.
C300
3
3-31