Konica Minolta bizhub C300 Users Manual [Security Operations page 28

Administrator Operations
Settings to be Made in
Advance
Image Controller Setting
Management Function
Choice
CE Password
CE Authentication
CS Remote Care
HDD
Setting the Enhanced Security mode to [ON] changes the setting values of
the following functions.
Function Name
Password Rules
Prohibit Function When
Auth. Error
Public User Access
User Name List
Print Without Authenti-
cation
User Box Admin. Setting
SSL
FTP Server
SNMPv1/v2c
SNMP v3 Security Level
and auth/priv-password
Print Data Capture
Network Setting Clear
Incorrect User Box No.
Entry
C300
Description
Calls for setting made by the Service Engineer. For details, ask
your Service Representative.
Factory Setting When Enhanced Security mode is set to [ON]
OFF ON (not to be changed)
Mode 1 Mode 2 (not to be changed)
Three times is set.
* In association with Secure Document Access
Method, the method is changed from authenti-
cation using Secure Document ID and pass-
word (Mode 1) to that using the password with
the secure document first narrowed down by
Secure Document ID (Mode 2).
Restrict Restrict (not to be changed)
OFF OFF (not to be changed)
Restrict Restrict (not to be changed)
Restrict Restrict (not to be changed)
OFF ON (not to be changed)
ON OFF (not to be changed)
Read/Write en- Only Read is enabled (not to be changed)
abled
auth/priv-pass- The security level can be selected from among
word [auth-password] and [auth/priv-password].
An 8-digit-or-more auth-password and priv-
password can both be set.
Allow Restrict (not to be changed)
Enabled Restrict
Print Print (Show Error Message can be changed, but
the function cannot be changed to Auto Create
User Box)
2
2-9