3
3.2
Change Password Function
When [ON (MFP)] is set for Authentication Method of User Authentication, the
machine permits each of all users who have been authenticated through
User Authentication to change his or her User Password.
The User Password entered is displayed as "*" or "●."
3.2.1
Performing Change Password
Note
Do not leave the machine while you are in the user operation mode. If it
is absolutely necessary to leave the machine, be sure first to log off from
the user operation mode.
<From the Control Panel>
0 For the logon procedure, see "Performing user authentication" on
page 3-2.
1
Log on to the user operation mode through User Authentication from
the control panel.
2
Press the [Utility/Counter] key.
3
Touch [User Setting].
3-8
User Operations
C300