Konica Minolta bizhub C300 Users Manual [Security Operations page 115

3
4
Touch [Password].
5
Enter the 8-to-64-digit User Password from the keyboard or keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 4.
6
Touch [OK].
7
Press the [Access] key.
? What if a wrong User Name or User Password is entered?
% If a wrong User Name is entered, a message appears that tells that
authentication has not been successful. The machine then prohibits
entry for User Authentication for 5 sec. and then causes the screen
of step 1 to reappear. Perform User Authentication once again.
% If there is a mismatch of User Password relative to the registered
User Name, a message appears that tells that authentication has
not been successful. The machine then prohibits entry of User
Name and User Password for 5 sec. and then causes the screen of
step 4 to reappear. Enter the correct User Password.
3-4
User Operations
C300