Activating The L.s.p; Rekommenderas För: Removal Of The Cybex Pallas M-Fix - CYBEX PALLAS M-FIX User Manual

1
2
3
L.S.P.
y
12
A
PRESS!
o

ACTIVATING THE L.S.P.

The "Linear Side Protection" system (L.S.P.) can be extended in two steps by
pressing the L.S.P. button(s). Together with the initial position, this provides a total of
three different L.S.P. settings.
Note! Always activate the L.S.P. on the side of the seat facing the car door (see
illustration).
To push the L.S.P. back into the housing, press the L.S.P. button again and push the
L.S.P. back into the starting position.
REMOVAL OF THE CYBEX PALLAS M-FIX
Perform the installation steps in the reverse order.
• Unlock the ISOFIX locking arms (o) on both sides by pushing the red
release buttons (y) and pulling them back simultaneously.
• Pull the seat out of the feed-in aids (u).
• Rotate the locking arms (o) 180°.
• Operate the adjustment lever (c) on the frame (w) of the CYBEX PALLAS M-FIX
and push the locking arms in as far as they will go.
Note! By folding in the locking arms (o), you are not just protecting the vehicle seat
but also the locking arms of the ISOFIX CONNECT system from dirt and damage.