Front Panel Port; Keypad; F Keys; Front Panel Port Connector - Emerson FloBoss S600 Instruction Manual

S600 Instruction Manual
5.2

Front Panel Port

5.3

Keypad

5.3.1 F Keys

5-2
The front panel port, located on the bottom of the front panel, is an
alternative connection for the Config600 software program to use
when transferring configuration files. The port requires a six-pin RJ-12
connector for EIA-232 (RS-232D) communications (see Figure 5-2).
Table 5-1 shows the pinout connections for a six-pin connector. You
may also want to refer to Table 3-7 in Section 3.3.4, Local Operator
PC or Remote Display Port, which describes the pinouts when using
the 15-way D-type female connector.
Table 5-1. Front Panel Port Connections
Pin
1
2
3
4
5
6
Figure 5-2. Front Panel Port Connector
The keypad for the front panel has been designed for ease-of-use and
to reduce the possibility of error. Keys on the keypad are color-coded
by type:
Yellow: Function.
Dark green: Four-direction & MENU.
Light green: Numeric.
Dark green: Operation.
The top of the keypad has four yellow function keys numbered F1 to
F4. You can program each F key as a shortcut to a frequently used
display page. Refer to Section 5.7.5, Assigning a Page to a Function
(F) Key, for the procedure on programming an F key.
Front Panel
Function
RTS
TX
GND
GND
RX
CTS
Revised Jan-07