Pulse Outputs (Pulseout); Frequency Inputs; Pulse Input Schematic (With Us 24 V P148 Mezzanine Card); Pulse Output Schematic - Emerson FloBoss S600 Instruction Manual

S600 Instruction Manual

4.2.4 Pulse Outputs (PULSEOUT)

4.2.5 Frequency Inputs

4-22
Figure 4-27. Pulse Input Schematic (with US 24 V P148 Mezzanine
Card)
Table 4-19. Dual-Pulse Input Pin Connections for SKT-F
Pin
4
23
3
22
2
21
1
20
The S600 provides four programmable pulse outputs, typically used for
electronic counters. Refer to Table 4-20 for the PULSEOUT pin
connections. Refer to Figure 4-28 for field wiring schematics.
Figure 4-28. Pulse Output Schematic
Table 4-20. PULSEOUT Pin Connections for SKT-E
Pin
31
32
33
34
35
The S600 supports two frequency inputs, typically used for density
transducer signals. Each input has an input range of 0 to 10 KHz.
Function
DUAL PULSE-CH1+
DUAL PULSE-CH1-
DUAL PULSE-CH2+
DUAL PULSE-CH2-
DUAL PULSE-CH3+
DUAL PULSE-CH3-
DUAL PULSE-CH4+
DUAL PULSE-CH4-
Function
PULSEOUT-CH1
PULSEOUT-CH2
PULSEOUT-CH3
PULSEOUT-CH4
RETURN CH1-4
I/O Revised Jan-07