Board Ready For Removal Or Insertion - Emerson FloBoss S600 Instruction Manual

Caution
Revised Jan-07
Figure 2-10. Board Ready for Removal or Insertion
To install a plug-in board:
Carefully align the boards with the guides (located at the top and
1.
bottom of the case). Gently slide the board into the case until it
mates fully with the appropriate connector on the backplane.
Press each of the two ejectors securely into place once the board is
2.
fully inserted.
Inserting and locating a plug-in board along the guides does not
require excessive force. Take care not to twist or otherwise distort the
boards during the installation.
Secure the board with the retention screws (two per board).
3.
Installation
S600 Instruction Manual
2-9