Using The Print Key; All Alarms; Archived Reports; Config Report - Emerson FloBoss S600 Instruction Manual

S600 Instruction Manual

5.7.7 Using the Print Key

5-12
By default, the S600 is configured to output reports to a serial printer
or a terminal. The S600 also outputs reports to its internal webserver.
You use the PRINT key to generate either a constant log or one of
several pre-configured reports. These pre-configured reports include:
Report

Constants Log

Display Dump

Security Dump

All Alarms

Current Report

Config Report

Archived Reports

Current Alarms

Modbus Maps
Alarm and Event
Log
When you press PRINT, the S600 displays the Print Options menu:
PRINT OPTIONS
1. HELP
2* CONFIGURATION
3* REPORTS
4* COMMUNICATIONS
5. CURRENT ALARMS
6* LOGS
7. ABORT PRINTING
Figure 5-6. S600 Print Options
Select a report based on the following options:
Option
Configuration
Front Panel
Description
Lists all the constant parameters and values that
are available for change from the display
(excluding those on menu 8).
Note: You can print the Constants Log as either a
text (.TXT) file or with commas separating the
items (CSV).
Lists the whole display matrix.
Lists the whole display matrix, along with the
current security levels assigned to data items.
Lists all possible alarms that can be generated by
the alarm system on this configuration.
Lists the current report as configured, normally this
would consist of the meter run totals.
Lists the configuration-specific parameters,
including any configured installed calculation sets.
Lists all archived reports, sorted by time and date.
Lists all the acknowledged and un-acknowledged
alarms currently set in the flow computer in
separate chronological lists.
Lists the Modbus maps stored in the FloBoss S600
that are assigned to a telemetry link.
Lists history of all alarms and events.
Sub Reports
1 Constant Log TXT
2 Constant Log CSV
3 Display Dump
4 Security Dump
5 All Alarms
Revised Jan-07