Controls, LEDs, and Connectors
3.3
Front Panel
The following switch, LEDs, and connectors are available on the MVME7100 front panel. Refer
to
Figure 3-1
for the location of each.
Figure 3-2
Front Panel LEDs, Connectors, Switch
COMM 1
USB
GENET 1
GENET 2
3.3.1
Reset/Abort Switch
The MVME7100 has a single push button switch to provide both the abort and reset functions.
When the switch is depressed for less than 3 seconds, an abort interrupt is generated to the
MC8641D PIC. If the switch is held for more than 3 seconds, a board hard reset is generated.
If the MVME7100 is the VMEbus system controller, a VME SYSRESET is generated.
48
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PMC 2
PMC 1
USER 1
ABT/RST
FAIL
SPEED
ACT
SPEED
ACT
MVME7100 Single Board Computer Installation and Use (6806800E08A)
Front Panel