Data Transmitting; Printer Sever Shared Setting - GCC Technologies puma iii series User Manual

Puma III User Manual

2.4.4 Data Transmitting

There are two options to transmit the data from the computer to the cutting
plotter:
Option 1
With proper interface settings, the data can be transmitted from your application
software package to the cutting plotters directly.
Option 2
Most cutting software packages are able to emulate HP-GL or HP-GL/2
commands. As long as the file is HP-GL or HP-GL/2 format, the cutting plotter
can output the data precisely.

2.4.5 Printer Sever Shared Setting

In "A-PC", set the printer driver as a shared printer, then use B-PC to connect
A-PC's printer driver via internet.
A-PC B-PC
Internet
USB COM Port
Installation 2-16