The Left-Hand Side; The Right-Hand Side Of Puma Iii - GCC Technologies puma iii series User Manual

1.4.4 The Left-hand Side (Figure 1-4)
Figure 1-4
1.4.5 The Right-hand Side of Puma III (Figure 1-5)
General Information
Figure 1-5
Power Switch – On when switches to [I]; Off to [O]
Fuse – 3 Amp.
AC Power Connector
Serial Interface Connector (RS232C)
used to connect the cutting plotter to a
computer through a serial interface cable.
USB Connector
used to connect the cutting plotter to a
computer through a USB cable.
1-6
Puma III User Manual