Placing The Registration Marks; Print The Graphics - GCC Technologies puma iii series User Manual

TIPS2: Create the contour in a separate layer and assign a different color for it.
■ Add registration marks around the graphic.
Note:
The Multiple Copies function is also available. It automatically copy the graphic and
registration marks.
Step 2 Placing the Registration Marks
The AAS Layout Instruction:
* Auto-detection function on the 1
Suggested 30mm margin on both left and right sides of media sheet.
Suggested 20~30mm margin on top of media sheet, and at least 50mm margin on
the bottom edge to prevent sheets dropping or any error occurred while media sizing.
Step 3 Print the Graphics
■ Print the graphic and the marks with your printer
Automatic-Aligning System
st
mark covers the grey area
5-7
Puma III User Manual