The Left-Hand Side; The Right-Hand Side - GCC Technologies RX Series User Manual

1.4 4 The Left-hand Side (Figure 1-4)
Figure 1-4
1.4.5 The Right-hand Side (Figure 1-5)
Figure 1-5
General Information
Power Switch – On when switches to [I]; Off to [O]
Fuse – 3 Amp.
AC Power Connector – used to insert the AC power cord.
Ethernet Connector– used to connect your
computer to a local area network.
Serial Interface Connector (RS232C) – used
to connect the cutting plotter to a computer
through a serial interface cable.
USB Connector
–
plotter to a computer through a USB cable.
1-6
RX Series User Manual
used to connect the cutting