Enabling And Disabling Parksense - Jeep Gand Sherokee 2016 Owner's Manual

Front Park Assist Audible Alerts
ParkSense will turn off the Front Park Assist audible alert
(chime) after approximately 3 seconds when an obstacle
has been detected, the vehicle is stationary, and brake
pedal is applied.
Adjustable Chime Volume Settings
Front and Rear chime volume settings can be selected
from the Uconnect System. Refer to Uconnect Settings"
in "Understanding Your Instrument Panel" for further
information.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense will retain its last known configuration state
through ignition cycles.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled with the
ParkSense switch.
When the ParkSense switch is pushed to dis-
able the system, the instrument cluster will
display the "PARKSENSE OFF" message for
approximately five seconds. Refer to "Driver
Information Display (DID)" in "Understanding Your
Instrument Panel" for further information. When the
gear selector is moved to REVERSE and the system is
disabled, the DID will display the "PARKSENSE OFF"
message for as long as the vehicle is in REVERSE.
The ParkSense switch LED will be ON when ParkSense is
disabled or requires service. The ParkSense switch LED
will be OFF when the system is enabled. If the ParkSense
switch is pushed, and the system requires service, the
ParkSense switch LED will blink momentarily, and then
the LED will be ON.
3