Driver Information Display (Did) Messages; Operation - Jeep Gand Sherokee 2016 Owner's Manual

492 STARTING AND OPERATING
NOTE: This mode is intended to be enabled with engine
running.
Transport Mode
To assist with flat bed towing, the air suspension system
has a feature which will put the vehicle into Entry/Exit
height and disable the automatic load leveling system.
Refer to "Uconnect Settings" in "Understanding Your
Instrument Panel" for further information.
NOTE: This mode is intended to be enabled with engine
running.
Wheel Alignment Mode
Before performing a wheel alignment this mode must be
enabled. Refer to "Uconnect Settings" in "Understanding
Your Instrument Panel" for further information.
NOTE: This mode is intended to be enabled with engine
running.
If equipped with a touch screen radio all enabling/
disabling of air suspension features must be done through
the radio. Refer to "Uconnect Settings" in "Understanding
Your Instrument Panel" for further information.

Driver Information Display (DID) Messages

When the appropriate conditions exist, a message will
appear in the DID display. Refer to "Driver Information
Display (DID)" in "Understanding Your Instrument
Panel" for further information.

Operation

The indicator lamps 3 through 6 will illuminate to show
the current position of the vehicle. Flashing indicator
lamps will show a position which the system is working
to achieve. When raising, if multiple indicator lamps are
flashing on the "Up" button, the highest flashing indica-
tor lamp is the position the system is working to achieve.