Jeep Gand Sherokee 2016 Owner's Manual page 359

• Set Date
When in this display, you may set the date manually.
Press the "Set Date" button then press the corresponding
arrows above and below the current date to adjust.
Safety/Assistance
After pressing the "Safety/Assistance" button on the
touchscreen the following settings will be available:
• ParkSense
The ParkSense system will scan for objects behind the
vehicle when the transmission shift lever/gear selector is
in REVERSE and the vehicle speed is less than 11 mph (18
km/h). It will provide an alert (audible and/or visual) to
indicate the proximity to other objects. The system can be
enabled with Sound Only, or Sound and Display. To
change the ParkSense status, press and release the
"Sound Only" or "Sounds and Display" button. Refer to
UNDERSTANDING YOUR INSTRUMENT PANEL 357
"ParkSense" in "Understanding The Features Of Your
Vehicle" for system function and operating information.
• Tilt Mirrors In Reverse
When this feature is selected, the exterior sideview
mirrors will tilt downward when the ignition is in the
RUN position and the transmission shift lever/gear
selector is in the REVERSE position. The mirrors will
move back to their previous position when the transmis-
sion is shifted out of REVERSE. To make your selection,
press the "Tilt Mirrors In Reverse" button on the touch-
screen and make your selection.
• ParkView Backup Camera Active Guidelines
Your vehicle may be equipped with the ParkView Rear
Back Up Camera Active Guidelines that allows you to see
active guidelines over the ParkView Back up camera
display whenever the shift lever/gear selector is put into
REVERSE. The image will be displayed on the radio
4