Enabling And Disabling Parksense - Jeep Gand Sherokee 2016 Owner's Manual

Radio No
Volume
Reduced
NOTE: ParkSense will reduce the volume of the radio, if
on, when the system is sounding an audio tone.
Adjustable Chime Volume Settings
Rear chime volume settings can be selected from the
Customer-Programmable Features section of the Uconnect
System, refer to "Uconnect Settings" in "Understanding
Your Instrument Panel" for further information.
The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.
ParkSense will retain its last known configuration state
through ignition cycles.
WARNING ALERTS
Yes Yes

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled with the
ParkSense switch.
Information Display (DID)" in "Understanding Your
Instrument Panel" for further information. When the
gear selector is moved to REVERSE and the system is
disabled, the DID will display the "PARKSENSE OFF"
message for as long as the vehicle is in REVERSE.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231
Yes Yes
When the ParkSense switch is pushed to dis-
able the system, the instrument cluster will
display the "PARKSENSE OFF" message for
approximately five seconds. Refer to "Driver
Yes Yes
3