Turning Off Call Forwarding - Snom d745 User Manual

D745 User Manual
The setting will change to "1
two seconds to return to the idle screen.
The status line and the status info screen will indicate that call forwarding is turned on and the
number incoming calls will be forwarded to.
Fig. 1
Note: Call forwarding is indicated in the status line, which can display only one
message at a time; forwarding of all calls (Fig. 1) is also indicated by the symbols on
the display.
When "Forward when busy" (Fig. 2) and "Forward after timeout" (Fig. 3) are both
activated, "Forward when busy" is shown in the status line. If there are other status
messages with a higher priority than call forwarding (e.g., firmware update available,
reboot required, etc.), they will take precedence over the call forwarding indication.
Press to show the Status info screen (Fig. 4) with all current status messages,
including call forwarding. When the symbol is not available on the display, you can
access Status info from the Settings menu:
1. Press
2. Press 6 Information.
3. Press 1 Status info.
Fig. 4

Turning off call forwarding

Forward all
Press
Press
2 Call Features
Press
1 Call Forwarding
Press
1 Forward All
Press
1 Activate
The menu item changes to "1
Activate", indicating that call forwarding is now active. Press
Fig. 2
.
Forward when busy
Activate". Press
Fig. 3
2 Call Features
1 Call Forwarding
2 Forward when Busy
1 Activate
for two seconds to return to the idle screen.
63
Using the Phone
Forward after timeout
2 Call Features
1 Call Forwarding
3 Forward after Timeout
1 Activate
for