Opening The Web Interface - Snom d745 User Manual

D745 User Manual
Firmware versions 8.7.4 and higher
When you register the first account during the initialization of the phone, your SIP user name and
password will be registered as the HTTP user name and password. If you wish to change them later,
you can do so on the phone's web interface > Advanced Settings page > QoS Security tab > HTTP
Server section.
Note:
-
If you do not replace the default administrator password by an individual one, an
unauthorized third party with access to the phone could set an administrator password
unknown to you. In such a case, you would no longer be able to switch from user mode to
administrator mode.
-
If you set your own passwords, be sure to write them down and store them in a secure
place.
Without the administrator password, you will not be able to return the phone and the web
interface from user mode to administrator mode; many settings will be inaccessible.
Without the HTTP password you cannot open the phone's web interface.

Opening the web interface

1. Look up the phone's IP address: Press
Info or 3 Help.
2. Open a web browser on your PC. Enter the IP address, preceded by "http://" or "https://" in the
address bar (for example: http://192.168.10.115) and press ENTER. The home screen opens:
, if available, or
36
Getting to Know Your Phone
> 6 Information > 2 System