Settings On The Phone And Turning On Call Forwarding - Snom D335 User Manual

D335 User Manual
interface for these settings, see "Call forwarding" on page 95.
Note: Call forwarding is set separately for each configured identity. When the setting is
done on the phone, it applies to the identity selected as outgoing identity.
Forward All: Forwarding all incoming calls to the number of the phone, extension, or mailbox
specified as this function's target.
Fig. 1
In the default setting, the symbol
key turns forwarding of all calls on and off, respectively. You can also map the function onto another
function key or use the settings menu as shown in the table below.
Forward when Busy: Forwarding calls ringing while the phone is busy to the number of the phone,
extension, or mailbox specified as this function's target.
Forward after Timeout: When a call starts ringing, the phone will wait for the number of seconds
specified in the setting "Call forwarding time". If the call is not accepted by the end of this time period,
it is forwarded to the number of the phone, extension, or mailbox specified as this function's target.
Fig. 3 – Forwarding all calls

Settings on the phone and turning on call forwarding

Forward all
Press
Press
Call Features
2
ABC
Press
Call Forwarding
1
Press
Forward All
1
Press
or Enable forwarding
1
The setting changes from off (no) (Fig. 6, below) to on (yes), and the setting for the forwarding
target appears (Fig. 7). In the case of forwarding after timeout, the setting for the time span
also appears(Fig. 8).
Press
Target
2
ABC
Fig. 2
is available in the function key line, and pressing the associated
Fig. 4 – Forwarding when busy
Forward when busy
Call Features
2
A BC
Call Forwarding
1
Forward when Busy
2
A BC
or Enable forwarding
1
Target
2
ABC
67
Fig. 1: All calls for one of the configured identities
are forwarded to a specified target.
Fig. 2: All calls for all or more than one of the
configured identities are forwarded to a
specified target or specified targets.
Scrolling line
Fig. 5 – Forwarding when call has not been
answered after time set in seconds
Forward after timeout
Call Features
2
AB C
Call Forwarding
1
Forward after Timeout
3
DEF
or
Target
2
ABC
Using the Phone
Enable forwarding
1