Appendix 4 - Programmable Functions; Freely Programmable Functions - Snom d745 User Manual

D745 User Manual
A
ppendix 4 - Programmable Functions
Following is a brief description of the function key settings available on the Function keys page of the
phone's web interface.
F
reely programmable functions
Action URL Action URLs are basically HTTP GET Requests that allow the phone to interact with web
server applications. They can be used to send various data from the phone to a web
server, like the customized settings stored on the phone; passwords are replaced by
empty strings. Action URLs can be triggered by predefined events ("Action URL Settings"
page of the phone's web interface) or manually by a pressing a function key that has
been programmed to trigger an action.
Auto Answer With this setting, your phone will automatically accept incoming calls when it is idle.
If you leave the text field empty, incoming calls for all configured identities will be
accepted; if you enter the number of an identity in the text field, only calls to that identity
will be accepted automatically (i.e., 1 for Identity 1, 2 for Identity 2 etc.).
BLF This function key allows showing the status (idle, ringing, held call, busy) of another
extension on the key's LED. By pressing the key, it may also be possible to pick up calls
ringing on the extension, to dial the extension when the phone is idle, and to transfer an
(Busy Lamp Field)
incoming call ringing on your own extension. These functionalities depend on your PBX;
for more information, please check snom's interoperability page and the PBX manual.
With Asterisk, generally use this feature rather than extension.
Button This is a function key that is connected to your PBX to perform a task specified in the
buttons document. For more information, see the detailed feature description at http://
wiki.snom.com/Features/LED_Remote_Control.
Call Agent This function key can be used by call agents to perform one of three different functions,
depending on the value entered in the "Number" text field:
•
•
•
Logging onto and off the system.
Text field entry: F_CALL_AGENT_LOGGEDIN.
Signalìng readyness to accept calls. For this function to work, the agent must be
logged in. Text field entry: F_CALL_AGENT_READY.
Announcing that they are working after a call. For this function to work, the agent
must be logged in.
Text field entry: F_CALL_AGENT_WORKINGAFTERCALL.
94
Appendix 4