Connecting Cable; Connecting By Parallel Interface - Xerox document centre285 series User Manual

2.2
This section describes connecting by cable, to the interface of the environment to be used.
Remember to switch off the power supply during installation to prevent electric shock.
You cannot use the optional Token Ring interface together with Ethernet interface.
2.2.1

Connecting by parallel interface

The following procedure explains how to connect by the parallel interface.
2
To connect by the parallel interface, you will need the parallel interface cable provided by our company as
an optional product. For details, consult our Customer Support Center.
Procedure
Insert the interface cable connector to the
parallel interface connector and secure it by the
wire clips on both sides.
Connect the other end of the interface cable
connector to the computer.
Switch on the printer.
If necessary, set the following items on the printer control panel (Network/Port > Parallel):
Print Mode
PJL
Adobe Protocol
Auto Eject Time
Bi-directional
"5.3 Common Menu Items" for details on the individual item and the setting method.
For normal use, there is no need to change the factory settings of all the items.
18

Connecting Cable

(Factory setting: Auto)
(Factory setting: Enable)
(Factory setting: Normal)
(Factory setting: 30 Secs)
(Factory setting: Enable)