Step 5: Connecting A Printer Cable - Xerox Phaser 3130 Quick Reference Manual

Step 5: Connecting a Printer Cable
To print from your computer, you need to connect your printer
to your computer with either a parallel interface cable or a
Universal Serial Bus (USB) cable.
Using a Parallel Cable
Note: To connect the printer to the parallel port of the computer
requires a certified parallel cable. You will need to buy a IEEE1284
compliant cable.
1
Make sure that both the printer and the computer are
turned off.
2
Plug the parallel printer cable into the connector on the
back of the printer.
Push the metal clips down to fit inside the notches on the
cable plug.
To the parallel port
on your computer
3
Connect the other end of the cable to the parallel interface
port on your computer, and tighten the screws.
See your computer User's Guide if you need help.
S U Y P
ETTING P OUR RINTER
1.9