Setting Port - Xerox document centre285 series User Manual

2.6
Activate the port to be used from the printer control panel.
If the settings have already been set to Enable, the procedure here is not needed. Follow the
procedure here only if the settings have been set to Disable.
You can also set the port settings from CentreWare Internet Services. For details, refer to "5.5
CentreWare Internet Services".
When using TCP/IP (LPD)
(LPD) Port Status
"2.6.1 Activating port" for details on activating LPD port.
When using internet printing
2
(IPP) Port Status
"2.6.1 Activating port" for details on activating IPP port.
When using SMB
(SMB) Port Status
(SMB) Transport Protocol
"2.6.2 Setting the port and transport protocol" for details on setting the SMB port and transport protocol.
When using software for managing printer remotely
(SNMP) Port Status
(SNMP) Transport Protocol
"2.6.2 Setting the port and transport protocol" for details on setting the SNMP agent and transport
protocol.
32

Setting Port

(factory setting: Enable)
(factory setting: Disable)
(factory setting: Enable)
(factory setting: TCP/IP , NetBEUI)
(factory setting: Enable)
(factory setting: UDP)