Table of Contents
Advertisement
4.2.3
Uninstalling the printer drivers
For drivers installed by the Setup.exe program, use the Unsetup.exe program to uninstall.
For Windows 95/Windows 98/Windows Me alternate drivers installed in Windows NT server
(workstation), use the Unsetup.exe program to uninstall the Windows 95/Windows 98/Windows Me
drivers and then activate the Unsetup.exe program of the Windows NT driver.
To uninstall the alternate drivers downloaded using the Add Printer Wizard dialog box at the client
computer, open the Printers window and erase the applicable printer icons.
Procedure
Click Start and select Run.
In the Run dialog box displayed, click Browse.
For this example, we will uninstall the DC 285 PCL 6 driver on the Windows 98 OS.
Insert in the PCL Driver/Network Utility (Windows
the Browse dialog box.
Next, select Unsetup.exe (English\DC285\Win9x_Me\PCL6\Setup\) from the CD-ROM and
click Open to close the Browse dialog box.
When uninstalling any driver, remember to use the Unsetup.exe program of the correct driver and of
the same version as the Setup.exe program used for installation.
Enter "DC235" instead of "DC285" if you are uninstalling the DC235 printer driver.
The path for the unsetup program appears in the Run dialog box.
Click OK to continue.
The following Printer Uninstall dialog box appears.
Check the printer model and click Next.
The following Ready to Start Deleting dialog box appears.
Click Finish to continue.
4.2 Installing/Uninstalling the Printer Drivers
) CD-ROM and select the CD-ROM drive in
4
69
Advertisement
Table of Contents
