Xerox document centre285 series User Manual page 92

4.3 Configuring the Printer Drivers
Paper Size
Specify the paper size to use for the print data. Options include:
A4 (210×297 mm) (default)
8.5×11" (Letter)
B5 (182×257 mm)
B4 (257×364 mm)
8.5×13" (Folio)
8.5×14" (Legal)
8K (267×388 mm)
A3 (297×420 mm)
11×17" (Ledger)
A5 (148×210 mm)
Postcard (100×148 mm)
5.5×8.5" (Statement)
B6 (128×182 mm)
A6 (105×148 mm)
Booklet on A4
Booklet on Letter
Booklet on A3
Booklet on Ledger
4
(5.5×8.5" (Statement), B6 (128×182 mm), and A6 (105×148 mm) are available only if
Bypass Tray has been selected for Paper Source Options on the Printer tab;
Booklet on A4, Booklet on Letter, Booklet on A3, and Booklet on Ledger are
available only if Duplex Module has been selected on the Printer tab)
You can define your own paper size by clicking Custom Paper Size.
Custom Paper Size
Click to display the Custom Paper Size dialog box for defining the non-standard size of the
print media that you are using. For a print job, it is enabled only if Bypass Tray has been
selected for Paper Source Options on the Printer tab.
Options include:
Select
Select from one of the standard paper sizes that is closer to your custom size, and then
click New to enable the other options for editing.
Name
Enter up to a maximum of 32 characters.
Unit
Choose either millimeter or inch to define the custom paper size.
Size
Enter a paper size ranging from 100×148 mm to 297×431 mm.
Portrait
Define the printable area margins in portrait orientation by defining the left, right, top
and bottom margins.
Landscape
Define the printable area margins in landscape orientation by defining the left, right, top
and bottom margins.
80