System Information - Samyung NAVIS800FS Instruction Manual

3.5 System Information

Users can recognize the system information such as LCD, Plotter Model, Program, Chart, PIC Version.
 Press
(
 Use the directional
Sys.-Info. Item
1.LCD-MODE
2.PLOT-MODE
) button and move [3.SYSTEM]  [5.SYSTEM INFO].
( ) button to set up each item shown below.
Input Range
Sharp/
PVI-1/PVI-5
LCD-640-Norm/
LCD-640-Auto
To set up the LCD model of SYSTEM
☞
[Note] It is advised that users normally should not work
on setting up as the default value is set.
To set up the Plot model of SYSTEM
 LCD-640-Norm : Plot Mode for normal use
 LCD-640-Auto : Plot Mode used with SAMYUNG autopilot
system
87
Description