Samyung NAVIS800FS Instruction Manual page 49

( ) and ( ) buttons, the waypoint to be registered into a route can be shown
If press
with a 10 unit.
In order to cancel the waypoint of the setting route, move the cursor to a waypoint number to be canceled
and then press ( ) button.
In case of navigating to jump up a certain of the waypoint in a navigate route, move the cursor to the
) button. "J" (Jump) character is shown in beside of the
(
required number and then, press
waypoint number and it can be exempted from a waypoint route temporarily. In case of release, press
( ) button once more in order to clear "J"(Jump) character.
The registered route waypoints are shown in '2.1.2 Route Navigation Set'.
49