Samyung NAVIS800FS Instruction Manual page 35

1.2.5 Mark Load
'1.2.4 Display a mark in a Plotter screen after calling a saved file from a storage tool.
 Insert save device to load saved file. (☞ Possible to omit when using Internal ROM & COM PORT)
 Press
(
 Select a storage tool into [Storage Select].
 After selecting file name, Press
However, be advised that the MARK into a current plotter screen is deleted when call the saved MARK
file at that time.
) button and move [1.DATA]  [2.MARK DATA]  [5.LOAD].
( ).
35