1.4.3 Waypoint Save
This function is to save the Lat/Long of the waypoint, MARK, name registered from '1.4.2 Waypoint Edit'
into an available storage tool as a file.
Insert things to be saved. (☞ Possible to omit when using Internal ROM & COM PORT)
Press
(
After input 4 digits of a file name by using a direction button,
then, press
(
After select a tool to be saved, press
Internal ROM
SD CARD
COM PORT
"W" is attached and saved in the front of the file name auto-input and it means a Way Point.
[ Ref. ] ☞
In using a new SD card, you must use it after making a initial disc once.
( ☞ Refer to '1.6 DISK FORMAT' )
) button and move [1.DATA] [4.WAYPOINT DATA] [3.SAVE].
). (☞ Numbers can be possible only in file name)
: Possible to save one file only.
: Possible to save several files.
: Possible to send another SYSTEM through RS-232 for storage.
(
) button.
45
(
) button or number button and