Samyung NAVIS800FS Instruction Manual page 74

Miscellaneous Setup
Items
1. DISTANCE UNIT
2. MAGNETIC VAR.
3. COURSE-UP SET
4. CABLE DISPLAY
5. WRECK DISPLAY
6. FISHING AREA
7. POSITION PRINT
8. SPECIAL SHIP
9. PASSWORD SET
Ref. ] ☞ Bearing Deviation
[
As for [2. MAGNETIC VAR.], True North should be used as it is always automatic,
except when Magnetic should be used.
※ Instance of Bearing Deviation
If GPS data bearing is 270 degrees and magnetic compass bearing is 280 degrees, input
(+)E10.0 to display the same as magnetic bearing because the difference is +10. If GPS
data bearing is 280 degrees and magnetic compass bearing is 270 degrees, input (-)W10.0
because the difference is -10.
Input Range
NM/KM/MM
True/Magnetic
E00.0°~ E99.9°
W00.0°~ W99.9°
Auto/Course/North/
East/South/West
ON/OFF
ON/OFF
00 Min. 00 Sec. ~
60 Min. 00 Sec.
Name of special ship,
00:00 ~ 23:59
0000 ~ 9999
Description
Select the distance unit on the Display.
NM: Nautical Mile (1NM = 1,852 m)
KM: Kilometer (1KM = 1,000 m)
MM: Land Mile (1MM = 1,610 m)
True North differs slightly from Magnetic
North, This is 'Magnetic Bearing
Deviation' and it varies slightly based on
the earth point. In using Magnetic North, it can be
corrected by inputting 'Magnetic Bearing Deviation'.
To set up the direction of the map display.
AUTO : Same as the own ship heading
COURSE : Same as the destination
NORTH/EAST/SOUTH/WEST
: North direction based on the preset Plotter map
Show the location of cable installed on a seabed.
Display the location of wreck
Display information for fishing area.
Fishing area shown by thick blue line.
To print the own ship position, speed, bearing at the
intervals of preset time. When not using this function, it
is 00 Min. 00 Sec.
For wastes carrier only. Using our SV-100, automatically
print the time and position of valve 's Open and Shut
out.
To set up Password for the system approach.
When not using this function, it is is '0000'.
Note : Default value is '0000'.
74