Samyung NAVIS800FS Instruction Manual page 38

1.3.2 Coastal Line Drawing
Displayed a coastal line by a user and it can register Line drawing(Mud), MARK, TEXT till 999 score each.
 Press
(
( ) button.
 Displayed explanation of each button onto a left screen and the coordinates cursor is shown into a
Plotter screen.
 After mover the coordinates cursor to the position of line drawing start by using a direction button and
press (
( ) button. Then, the coastal line is keeping connection.
In order to jump the coastal line up to another point, not drawing a coastal line connected, after move
the cursor to a point of start, press
connected and press
coastal line, after press
) button and move [1.DATA]  [3.USER'S LINE]  [2.DRAWING] and then press
) button, then, after move the cursor to a point to be connected and press
( ) button, the coastal line is displayed apart. In order to delete a
( ) button and set a range to be erased by using a direction button and
( ) button. If the cursor is moved to a point to be
38