Samyung NAVIS800FS Instruction Manual page 27

1.1.4. Track Save
Use this function to save TRACK DATA to selected device while Vessel navigates.
 Insert things to be saved. (☞ Possible to omit when using Internal ROM & COM PORT)
 Press
(
 After input 4 digits of file name by using Direction button,
Press (
 After select things to be saved and then, press
 Internal ROM
 SD CARD
 COM PORT
"T" is attached and saved in the front of the file name auto-saved and it means a Track.
[ Ref. ] ☞
In using a new SD card, you must use it after making a initial disc once.
( ☞ Refer to '1.6 DISK FORMAT' )
) button and move [1.DATA]  [1.TRACK DATA]  [4.SAVE].
) button. (☞ Numbers can be possible only in file name)
: Possible to save only one file.
: Possible to save several files.
: Possible to send to another SYSTEM through RS-232 for storage.
( ) button or number button and then
( ) button.
27