Table of Contents
Advertisement
How to set up a Route Navigation by using a course button.
Register a new waypoint by using
be used in order to set up a new route-navigation in a plotter screen with ease.
When press
red line is shown.
After move the coordinates CURSOR to a waypoint set up by using a direction button, press
(
) button to show the waypoint and set up a route-navigation.
After move the coordinates CURSOR to next waypoint set up by using a direction button, press
(
) button. You can repeat this method whatever you want to set up waypoints.
If press
(
set up.
In this procedure, if press
of the registered route-navigation so that you can use this function in order to add a new waypoint into a
route-navigation.
In order to Navigation Cancellation, move
[2.SET] [1.NAVIGATION SET] [4.EXIT WPT/RTE/ANCHOR] and press
) button. ( ☞ Refer to '2.1.4 EXIT WPT/RTE/ANCHOR (Navigation Cancellation)' )
(
press
(
(
) button in a Plotter, the coordinates CURSOR connected to own-ship with a
) button, the coordinates CURSOR is disappeared and while, the rout-navigation is
(
) button once more, the CURSOR is started from a last waypoint
) button and set up a route-navigation at the same time. It can
57
(
) button or
Hide quick links:
Advertisement
Table of Contents
