Table of Contents
Advertisement
[ CAUTION ] ☞ HOW TO SET UP SMOOTHING
The position of the vessel, speed, and direction can fluctuate due to the vessel type and speed. Refer to the
below and set up smoothing.
1. In case the vessel speed is low : In case vessel speed/Direction fluctuate, increase the value more.
2. In case the vessel speed is high : Set up the smoothing low and vessel speed/Direction changes fast.
Vessel speed
2~5knots
5~10knots
10~15knots
Above 15 knots
[note] ☞ Position smoothing value can be zero.
The above table is basic value based on vessel speed and , according to navigation condition, adjust the
value so that the change of speed and direction is optimum condition.
3. [5.Speed Mode] set up
Press the button as below and the speed will change to [High speed],[Mid. speed],[Low speed] ,then choose
the speed.
(
)
(
4. [4.Smoothing set]
Press the button as below.
(
)
(
Mode] Enter vessel speed using [Number button]
value using [Number button]
☞ The Range : Position (0~9), Speed(000~399), Direction(0~99)
<Illustration of smoothing value>
Pos.
[position]
[vessel speed]
0
0
0
0
)
(
)
)
(
)
(
),
Spd.
[Direction]
080~130
70~90
020~100
20~70
010~030
10~20
000~001
00~01
(
)
(
)
(
)
(
)
(
) Direction value mode Enter direction
69
Crs.
[speed mode]
Low speed
Low speed
Mid. speed
High spee
(
)
(
)
(
) [5.Speed
Hide quick links:
Advertisement
Table of Contents
