If set up a range of Anchor Alarm to [2.SET] [2.ALRAM SET] [3.ANCHOR ALARM], the range of
anchor alarm show as a red circle in a plotter screen. Besides, the relative information as such Lat/Lon,
direction, break away distance etc. with set up "ANCHOR" in a bottom-left of the Plotter screen are shown.
If the vessel breaks away from a range of anchor alarm, the alarm sounds and the red circle blinks in
order to advise of the vessel's break away from the range.
For 'ANCHOR ALARM', move [2.SET] [1.NAVIGATION SET] [4.EXIT WPT/RTE/ANCHOR] and
press
(
) button or press
( ☞ Refer to '2.1.4 EXIT WPT/RTE/ANCHOR (Navigation Cancellation)' )
[ Ref. ] ☞
If the anchor alarm is set [OFF], the red circle and alarm sounds don't take
place in a plotter screen.
(
) button.
59