2.1.4 EXIT WPT/RTE/ANCHOR (Navigation Cancellation)
This function enables the operators to clear the Waypoint Navigation, the navigational functions of Route
Navigation, Anchorage Setup and Monitoring Setup.
Press
(
Press
(
monitoring setup will be all cleared.
[ Ref. ] ☞
As for clearing the setups of Navigation, Anchorage and Monitoring, use
) button and move [2.SET] [1.NAVIGATION SET] [4.EXIT WPT/RTE/ANCHOR].
) button, then the above-shown navigational functions, the anchorage setup, the
(
) buttons with convenience.
60