Samyung NAVIS800FS Instruction Manual page 34

1.2.4 Mark Save
'1.2.2 Mark Append' is saved to saving tool as a file.
 Insert things to be saved. (☞ Possible to omit when using Internal ROM & COM PORT)
 Press
(
 After input 4 digits of file name by using Direction button,
Press (
 After select things to be saved and then, press
 Internal ROM
 SD CARD
 COM PORT
"M" is attached and saved in the front of the file name auto-saved and it means a Mark.
[ Ref. ] ☞
In using a new SD card, you must use it after making a initial disc once.
( ☞ Refer to '1.6 DISK FORMAT' )
) button and move [1.DATA]  [2.MARK DATA]  [4.SAVE].
) button. (☞ Numbers can be possible only in file name)
: Possible to save only one file.
: Possible to save several files.
: Possible to send to another SYSTEM through RS-232 for storage.
( ) button or number button and then
( ) button.
34