Tes Min/Max Parameters - HP 86037B Instruction Manual

Table 4-11. TES GUI Min/Max Parameters (1 of 3)
TES Name
Vfy_MaxAvgFac
Vfy_MaxCalLen
Vfy_MaxCalLim
Vfy_MaxLen
Vfy_MaxLenRepeat
Vfy_MaxMaxCalLen
Vfy_MaxModFreq
Vfy_MaxPMIL
Vfy_MaxPMPC
Vfy_MaxPMUR
Vfy_MaxPrefWL
Vfy_MaxRI
Vfy_MaxSteps
Vfy_MaxStepWave
Remote Control

TES Min/Max Parameters

TES Min/Max Parameters
Table 4-11 defines the TES parameters in the database that are utilized by the
GUI to check values entered in the GUI. All of these parameters are located at
the "System" level. The table shows the parameters for a dual band system.
For a single band system the parameters with "_LB" and "_HB" extensions will
only appear once with either the "_LB" or "_HB" extension for a low band or
high band system.
Type Value
Int32 999
Real64 1000000
Real64 0.00000000009
Real64 1000000
Int32 32767
Real64 1000000
Real64 3000000000
Real64 100
Real64 100
Real64 20
Real32 3000
Real32 2
Int32 32767
Real32 20
4-38
Unit Description
Max Average Factor limit for GUI
m Max Cal Length limit for GUI
s Max Verify Cal Limit for GUI
m Max Length limit for GUI
Max No. of Length meas. limit for GUI
Max Length limit for Cal for GUI
Hz Max modulation frequency limit for GUI
Max Power Monitor insertion loss for GUI
Max Power Monitor power constant for GUI
Max Power Monitor under range limit for GUI
nm Max value allowed in wavelength preferences
Max Refractive Index limit for GUI
Max No. of Steps limit for GUI
nm Max Wavelength Step size limit for GUI