Yealink SIP-T2XP Administrator's Manual page 51

Local
To create a dial-now rule via web user interface:
1. Click on Settings->Dial Plan->Dial-now.
2. Enter the desired value in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the dial-now rule will apply to all accounts on
the IP phone.
4. Click Add to add the dial-now rule.
To configure the delay time for the dial-now rule via web user interface:
1. Click on Features->General Information.
Web User Interface
Getting Started
dial-now rule.
For more information, refer to
Plan on page 269.
Create the dial-now rule for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-dialnow&q=load
Configure the delay time for the
dial-now rule.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Dial
35