Yealink SIP-T2XP Administrator's Manual page 313

Parameter-
auto_redial.interval
Description
Format
Default Value
Range
Example
Parameter-
auto_redial.times
Description
Format
Default Value
Range
Example
Parameter-
account.X.auto_answer
Description
Configuration File
<y0000000000xx>.cfg
Configures the interval (in seconds) for the IP
phone to wait between redials.
The IP phone redials the dialed number at
regular intervals till the callee answers the
call.
Integer
10
1 to 300
auto_redial.interval = 10
Configuration File
<y0000000000xx>.cfg
Configures the redial times for the IP phone.
The IP phone tries to redial the dialed number
as many times as configured till the callee
answers the call.
Integer
10
1 to 300
auto_redial.times = 10
Configuration File
<MAC>.cfg
Enables or disables auto answer feature for
account X.
If it is set to 1 (Enabled), the IP phone can
automatically answer an incoming call.
X ranges from 1 to 6.
Note: The IP phone cannot automatically
answer the incoming call during a call even if
auto answer is enabled.
Appendix
297