Yealink SIP-T2XP Administrator's Manual page 339

Format
Default Value
Range
Example
Phone Basis
Parameter-
features.pickup.direct_pickup_e
nable
Description
Format
Default Value
Range
Example
Parameter-
features.pickup.direct_pickup_co
de
Description
Format
Default Value
Boolean
0
Valid values are:
0-Disabled
1-Enabled
transfer.tran_others_after_conf_enable = 1
Configuration File
<MAC>.cfg
Enables or disables the IP phone to display
the DPickup soft key when the IP phone is
off-hook.
Note: It is not applicable to SIP-T20P IP
phones.
Boolean
0
Valid values are:
0-Disabled
1-Enabled
features.pickup.direct_pickup_enable = 1
Configuration File
<MAC>.cfg
Configures the directed call pickup code on a
phone basis.
Note: The directed call pickup code
configured on a per-line basis takes
precedence over that configured on a phone
basis.
String
Blank
Appendix
323