Yealink SIP-T2XP Administrator's Manual page 134

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
HTTP is an application protocol that runs on top of the TCP/IP suite of protocols. HTTPS is
a web protocol that encrypts and decrypts user page requests as well as pages
returned by the web server. Both HTTP and HTTPS port numbers are configurable.
Procedure
Web server type can be configured using the configuration files or locally.
Configuration File
Local
To configure web server type via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of HTTP.
3. Enter the HTTP port number in the HTTP Port (1~65535) field.
The default HTTP port number is 80.
4. Select the desired value from the pull-down list of HTTPS.
118
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Configure the web access type,
HTTP port and HTTPS port.
For more information, refer to
Web Server Type on page 326.
Configure the web access type,
HTTP port and HTTPS port.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Configure the web access type,
HTTP port and HTTPS port.