Yealink SIP-T2XP Administrator's Manual page 342

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Format
Default Value
Range
Example
Parameter-
wui.http_enable
Description
Format
Default Value
Range
Example
Parameter-
network.port.http
Description
Format
Default Value
326
Note: It is not applicable to SIP-T19P IP
phones.
Boolean
0
Valid values are:
0-Disabled
1-Enabled
account.1.dialoginfo_callpickup = 1
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to access its
web user interface using HTTP protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
1
Valid values are:
0-Disabled
1-Enabled
wui.http_enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the HTTP port used to access the
web user interface of the IP phone.
The default HTTP port is 80.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Integer
80