Yealink SIP-T2XP Administrator's Manual page 41

Default Gateway

Primary DNS

Secondary DNS

Procedure
Network parameters can be configured manually using the configuration files or
locally.
Configuration File
Local
To configure the IP address mode via web user interface:
1. Click on Network->Basic.
2. Select desired value from the pull-down list of Mode (IPv4/IPv6).
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the IP phone.
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Getting Started
Configure network parameters of
the IP phone manually.
For more information, refer to
Static Network Settings
261.
Configure network parameters of
the IP phone manually.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Configure network parameters of
the IP phone manually.
on page
25