Yealink SIP-T2XP Administrator's Manual page 252

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Create directory between <root_favorite_set> and </root_favorite_set>.

When specifying the display name of the directory list, the valid values are Local

Contacts, History, Remote Phone Book (not applicable to SIP-T20P IP phones) and
LDAP (not applicable to SIP-T19P and SIP-T20P IP phones).
When specifying the display priority of the directory list, the valid values are 1, 2, 3

and 4. 1 is the highest priority, 4 is the lowest.
When enabling or disabling the desired directory list, the valid values are 0 and 1.

0 stands for Disabled, 1 stands for Enabled.
Procedure
Use the following procedures to customize a directory template.
Customizing a directory template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, add the following string to the file.
Each starts on a separate line:
<item id_name="" display_name="" priority="" enable="" />
Where:
id_name="" specifies the existing directory list you want to configure. We do not
recommend editing this field.
display_name="" specifies the display name of the directory list. We do not
recommend editing this field.
priority="" specifies the display priority of the directory list.
enable="" enables or disables the directory list.
3. Specify the values within double quotes.
4. Place this file to the provisioning server.
The following is an example of a directory template:
<root_favorite_set>
<item id_name="localdirectory" display_name="Local Directory" priority="1"
enable="1" />
<item id_name="history" display_name="History" priority="2" enable="0" />
<item id_name="remotedirectory" display_name="Remote Phone Book"
priority="3" enable="0" />
<item id_name="ldap" display_name="LDAP" priority="4" enable="0" />
</root_favorite_set>
236