Yealink SIP-T2XP Administrator's Manual page 278

Administrator's Guide for SIP-T2xP and SIP-T19P IP Phones
Format
Default Value
Range
Example
Parameter-
network.internet_port.ip
Description
Format
Default Value
Range
Example
Parameter-
network.internet_port.mask
Description
Format
Default Value
Range
Example
262
Integer
0
Valid values are:
0-IPv4
1-IPv6
2-IPv4&IPv6
network.ip_address_mode = 0
Configuration File
<MAC>.cfg
Configures the IP address when the Internet
port type is configured as Static IP Address
and the IP address mode is configured as IPv4
or IPv4&IPv6.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
IPv4 Address
Blank
Not Applicable
network.internet_port.ip = 192.168.1.20
Configuration File
<MAC>.cfg
Configures the subnet mask when the Internet
port type is configured as Static IP Address
and the IP address mode is configured as IPv4
or IPv4&IPv6.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Subnet Mask
Blank
Not Applicable
network.internet_port.mask = 255.255.255.0